Borescopes, fiberscopes & videoscopes
FireSight & Pultz high temperature CCTV video systems for boilers, furnaces, kilns & incinerators (up to 3500ºF)
Hand-Held Non-Contact Thermometers
Heitronics accurate non-contact infrared thermometers with long term stability
Ultrasonic wall thickness gauges
Holiday (porosity) detectors
Coating (paint) thickness gauges
Wire terminal pull testers
Ultrasonic Wall Thickness Gauges
Main Menu

TI-25LT Low Cost Thickness Gauge

TI-40N Standard Thickness Gauge
TI-25M Industrial Thickness Gauge
TI-25DL Industrial Thickness Gauge with Data Logging
TI-25M-MMX Thru-Paint Thickness Gauges
TI-25DL-MMX Thru-Paint Thickness Gauges with Data Logging
TI-007 Precision Thickness Gauge
TI-007DL Precision Thickness Gauge with Data Logging
TI-1071 Intrinsically Safe Thickness Gauge
Certified Steel Test Blocks

Through Paint Ultrasonic Wall Thickness Gauge with Data Logging

TI-25DL-MMX Thru Paint Ultrasonic Wall Thickness GaugePulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)
Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters).

The new CHECK-LINE TI-25DL-MMX Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!

The TI-25DL-MMX can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.

The TI-25DL-MMX incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.

The TI-25DL-MMX probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.

Features of the TI-25DL-MMX:

 Ability to measure through paint and eliminate coatings
 Resolution of 0.001 inch (0.01 mm)
 Large, backlit LCD display retains last reading
 Simple operator controls virtually eliminate training
 RS-232C Serial output for downloading stored data to a printer or computer
 Memory for 1000 data points in up to 10 batches
 Special-purpose probes are offered for a variety of applications
 Switch-selected units for inches or mm
 For underwater surveying, probe cable lengths up to 50 feet are optionally
 CE Certified

Typical Applications:

Ultrasonic wall thickness gage applications

Accessories for the TI-25DL-MMX:

Steel Test Block

Precision Machined and Finished

Includes NIST Report and Test Data

Includes Wooden Storage Box

Steel test block for wall thickness gage

TICC-M Protective Cover

Constructed from heavy duty Cordura Nylon

Built-in belt loop

Includes wrist & shoulder straps

TICC-M Protective cover for digital thickness gauge


Range Pulse-Echo Mode(Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters).
Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters). 
Resolution .001" (0.01 mm) 
Display 4 - Digit, 0.5" Backlit LCD 
Velocity Range 0.0492 to .3937 in./s. (1250 to 10,000 meters/second) 
Probe 5 MHz, 0.25" Diameter (6.35 mm) with rubber molded grip. 
Probe Wearface PEEK (Polyethlethylketone) 
Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). 
Temp. Limits Ambient: -20 to 120 F (-30 to 50 C)
Material: 0 to 200 F (-20 to 100 C) Special high temperature probes are optionally available 
Serial Output RS-232C (8, N, 1, user-set baud rate) 
Battery Type Two AA batteries 
Battery Life 200 hours 
Weight 7 ounces (196 g) 
Size 2.5 x 4.5 x 1.25"
(64 x 114 x 32 mm) 
Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. 
Warranty Gauge: 5 Years
Probes: 90 Days 

Measuring Limits:

Measuring limits for the TI-25DL-MMX gage

Complete Kit:

The TI-25DL-MMX is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case. Complete TI-25DL-MMX kit


[ Home ]
[ Ultrasonic wall thickness gauge ] [ Coating thickness gauge ]
[ Holiday (porosity) detector ]
[ Wire terminal pull testers ] [ Stroboscopes ] [ Tachometers ]
[ Borescope, fiberscope & videoscope ] [ Durometers ]
[ FireSight & Pultz high temperature CCTV system ]
[ Portable non-contact thermometer ] [ Heitronics infrared pyrometer ]
[ Contact us ]