Product
Lines
Borescopes, fiberscopes & videoscopes
FireSight & Pultz high temperature CCTV video systems for boilers, furnaces, kilns & incinerators (up to 3500ºF)
Hand-Held Non-Contact Thermometers
Heitronics accurate non-contact infrared thermometers with long term stability
Ultrasonic wall thickness gauges
Holiday (porosity) detectors
Coating (paint) thickness gauges
Stroboscopes
Tachometers
Durometers
Wire terminal pull testers
 
Ultrasonic Wall Thickness Gauges
Main Menu

TI-25LT Low Cost Thickness Gauge

TI-40N Standard Thickness Gauge
TI-25M Industrial Thickness Gauge
TI-25DL Industrial Thickness Gauge with Data Logging
TI-25M-MMX Thru-Paint Thickness Gauges
TI-25DL-MMX Thru-Paint Thickness Gauges with Data Logging
TI-007 Precision Thickness Gauge
TI-007DL Precision Thickness Gauge with Data Logging
TI-1071 Intrinsically Safe Thickness Gauge
Certified Steel Test Blocks

TI-25M-MMX
Through Paint
Ultrasonic Wall Thickness Gauge

TI-25M-MMX ultrasonic wall thickness gauge
Measuring Ranges:
Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)
Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters)

The new CHECK-LINE TI-25M-MMX Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!

The TI-25M-MMX can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.

The TI-25M-MMX probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.

Features of the TI-25M-MMX:

 Ability to measure through paint and eliminate coatings
 Resolution of 0.001 inch (0.01 mm)
 Large, backlit LCD display retains last reading
 Simple operator controls virtually eliminate training
 Special-purpose probes are offered for a variety of applications
 Switch-selected units for inches or mm
 For underwater surveying, probe cable lengths up to 50 feet are optionally
 CE Certified

Typical Applications for Ultrasonic Thickness Gauges:

Typical applications for wall thickness gages

Accessories:

Steel Test Block

Precision Machined and Finished

Includes NIST Report and Test Data

Includes Wooden Storage Box

Calibrated steel test block

TICC-M Protective Cover

Constructed from heavy duty Cordura Nylon

Built-in belt loop

Includes wrist & shoulder straps

TICC-M protective cover

Specifications of the TI-25M-MMX:

Range Pulse-Echo Mode(Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters).
Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters). 
Resolution .001" (0.01 mm) 
Display 4 - Digit, 0.5" Backlit LCD 
Velocity Range 0.0492 to .3937 in./s. (1250 to 10,000 meters/second) 
Probe 5 MHz, 0.25" Diameter (6.35 mm) with rubber molded grip 
Probe Wearface PEEK (Polyethlethylketone) 
Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). 
Temp. Limits Ambient: -20 to 120 F (-30 to 50 C)
Material: 0 to 200 F (-20 to 100 C) Special high temperature probes are optionally available 
Battery Type Two AA batteries 
Battery Life 200 hours 
Weight 7 ounces (196 g) 
Size 2.5 x 4.5 x 1.25"
(64 x 114 x 32 mm) 
Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. 
Warranty Gauge: 5 Years
Probes: 90 Days 

 Measuring Limits:

Measuring limits for the TI-25M-MMX

Complete Kit:

The TI-25M-MMX is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.

 

[ Home ]
[ Ultrasonic wall thickness gauge ] [ Coating thickness gauge ]
[ Holiday (porosity) detector ]
[ Wire terminal pull testers ] [ Stroboscopes ] [ Tachometers ]
[ Borescope, fiberscope & videoscope ] [ Durometers ]
[ FireSight & Pultz high temperature CCTV system ]
[ Portable non-contact thermometer ] [ Heitronics infrared pyrometer ]
[ Contact us ]